|
Radio receivers, electronic modules, decoders, transformers
& other spares for Seip garage door operators |
|
Click image to enlarge
|
433Mhz receiver & mini keyfob upgrade kits
suitable for gate or garage door control
24volt & 230volt versions available
Click here for further details |
|
|
Four channel weather-resistant IP65 encased receiver
This Seip EKR4SP433 radio control receiver unit can provide individual control of up to
four items such as remote controlled garage doors, gates, pumps or outside lighting etc.
The unit has four relay outputs suitable for switching low-voltage or mains to provide
individually selectable latched or impulse outputs via isolated relay contacts rated @ 12A 240V
Compatible with Seip SKR series keyfob transmitters
Click here for further details |
|
Click image to enlarge
|
Radio control decoder modules
For Seip A45, A60, C75 & C100 operators & for channel
expansion of the external receivers shown above - two versions: 12 bit for 40.685Mhz
system & RC250 for the 433RC AM system
Price: £
excl. VAT |
|
Availability: allow 2-3 days delivery |
|
|
Click images to enlarge
receiver module Seip TM & TS series |
Radio control receiver modules
40.685Mhz, 433RC AM & current TM/TS 433Mhz types available
Price: £ excl. VAT |
|
Availability:
all versions available from stock
|
|
|
P.C.B. fitting instructions |
P.C.B. logic control modules
Our Ref: PE05004
For Seip remote controlled garage door operators
Price: £ excl. VAT |
|
Availability: allow 2-3 days delivery |
|
|
Click image to enlarge
|
Mains transformers for Seip operators
for models A45, A60, M50, C75, C100, TM50, TM60, TM80, TS75 & TS100
Price: £
excl. VAT |
|
Availability: allow 2-3 days delivery |
|
|
Click image to enlarge
Motor & gearbox (TS75 type shown) |
Replacement motor & gearbox
assembly for Seip operators
Compatible with the Seip TS75 Garage door opener
our ref: PL1213
|
|
Click image to enlarge
|
Replacement metal gear pinion
for Seip model APM60 & APM80
(direct replacement for the original plastic type)
our ref:
SEIPGEAR
|
|
|
Click image to enlarge
|
White nylon guide pulley for C rail track
Suits all Seip garage door operator models
Seip part ref: PI0120
Price: £
excl. VAT |
|
|
Click image to enlarge
|
Manual release cable assembly
(includes inner and outer bowden cable)
Suits all Seip garage door operator models
Seip part ref: PM07000
Price: £
excl. VAT |
|
|
Click image to enlarge
|
Black plastic carriage block assembly
with manual release mechanism
Suits all Seip garage door operator models
Seip part ref: PH2600
Price: £
excl. VAT |
|
|
|
Motor cover for Seip TM & RP series
(lamp cover not included)
Our ref: TM Cover / P1009
Price: £
excl. VAT |
|
|
|
Rear terminal cover for Seip TM & RP series
Our ref: TM Rear Cover / P1011
Price: £
excl. VAT |
|
|
|
Lamp cover for Seip TM & RP series
Suitable for use with the following motors: RP60A, TM50, TM60, TM80
|
Our ref: TM lamp cover / TMLPCOV
Price: £
excl. VAT |
|
|
|
|
Two-piece motor cover to suit the following Seip
models: A45, A60, M50, C75, C100, TS75 & TS100
Note: this two-piece cover set can replace the early one-piece version
(lamp cover not included)
Our ref: TS Cover / PI0006
Price: £
excl. VAT |
|
Lamp cover for use with the above two-piece motor cover
Suitable for use with the following motors:
A45, A60, M50, C75, C100, TS75 & TS100 |
Our ref: TS lamp cover / TSLPCOV
Price: £
excl. VAT |
|
|
|
Click image to enlarge
|
Door connecting bracket for horizontally tracked doors
made by Seip Antriebs Technik this item is also
compatible with most other makes of electric operator
our ref:
PM04107
Price: £
excl. VAT |
|
|
Click image to enlarge
|
Door connecting bracket to suit Hormann sectional doors
compatible with all electric operators
our ref: APL0044
Price: £
excl. VAT
|
|
|
Click image to enlarge
|
'Hockey-stick' door connecting arm for
horizontally tracked one-piece doors.
this item made by Seip Antriebs Technik but is also compatible
with most other makes of electric operator - overall length - 45cm
our ref: APL0041
Price: £
excl. VAT
|
|
|
Click image to enlarge
|
Auto closure timer module for Seip
TS75/TS100
plug in module to provide auto closure of the door after
an adjustable time delay.
Mounting pillars included
Our Ref: C40320
Price: £
excl. VATNote: For safety reasons we advise that
if an auto closure module is fitted, an infra-red break-beam safety detection device is installed to prevent
auto closure if the door is obstructed. Please contact us for more information. |
|
|
|
Replacement Fuses & Courtesy
lamp bulbs for Seip operators
Click here for details |
|
|
|
Replacement Seip Keyfob Transmitters
Click here for details |
|
|
|
Replacement pushbutton-switches
Click here for details |
|